SONIC170 v2 Matrix RGB designer user guide

1.      Open the html page of “SONIC170 v2 -RGB CONTROL”.

Be sure to use a browser with the chromium engine. Such as Chrome/Edge.

2.      Click the “Connect to keyboard” and choose the “sonic170” to connect.

3.      After enabling the “live Sync”, any changes you make to the matrix RGB will be immediately synchronized to the keyboard. Otherwise, you need to click “Upload All” before it takes effect.

4.      You can design your matrix LED in “Matrix Effects”,

“Pad LED” - Turn ON/OFF the light.

“Direction” – Change the direction of the pattern.

“Mode” – You can change the lighting effect here.

“Brightness” - Adjust the brightness of the RGB lights.

5.      Customized lighting patterns

Before customizing the lighting pattern, please make sure to select "Custom 1-5".

6.      “TYPE MODE” will only take effect when the lighting mode is changed to "30 Typing Feedback”.

 

7.      You can modify the ambient lights and the caps-lock light on the right side of the keyboard at the Side Strip.

8.      In the "Frame Animation" section, you can create GIF animations and upload them to the keyboard.

9.      Before creating the GIF animation, please first select the animFps.

10.   You can also Import PNG or Import GIF.

11.   Then select to save it as Custom1(Animation) or Custom2(Animation), only two animations can be saved.

12.   If you want to delete the animation, you can go the Matrix Effects page, and click the Clear Animation button.

13.   The "Check for updates" button at the bottom of the page can be used to obtain firmware updates and Json. After obtaining the updates, you still need to click the corresponding button below to download the files you require.

14.   When you need to update the firmware, please click the "Flach Firmware" button and follow the operation instructions indicated in the pop-up window.

15.   So now you can freely enjoy it.

Feel free to contact @rien anytime if you have any further questions.

Email: rien@keynex.cc